RING SIZE GUIDE
Find your perfect ring size using one of the following at home methods
Method 1: Measure an Existing Ring
- Find an existing ring that fits your desired finger.
- Use a ruler to measure the internal diameter of the ring in millimeters (mm). Make sure to measure the widest part of the inside of the ring.
- Refer to the chart below to find your corresponding ring size.
Method 2: Measure Your Finger
- Take a strip of paper or a piece of string, approximately ¼ inch (6mm) wide.
- Wrap the paper or string around the base of your finger, or where you intend to wear the ring.
- Mark the point where the end of the paper or string overlaps.
- Use a ruler to measure the length of the paper or string in millimeters (mm).
- Refer to the chart below to find your corresponding ring size.
Tips for Accurate Measurement
- Measure your ring size when your fingers are at a normal body temperature, as fingers can shrink or expand due to temperature changes.
- Keep in mind that wider bands may feel tighter than narrow bands, so you might want to consider choosing a slightly larger size for wide rings.
If you have any questions or need further assistance, please don't hesitate to reach out to us at support@madebyaltair.com. We're here to help you!